This page is an online two dimensional code generator which is written in PHP. It can generate QR Code, Data Matrix, Aztec Code and Micro QR Code.
Using the form on this page, you can create two dimensional code images that trigger various actions on the scanner device. Don’t forget to install Qrafter or Qrafter Pro (why two versions?) to scan and generate QR Codes if you have an iPhone or iPad. So far, this page created 5,005,022 codes since I started counting in January, 2010.
Please be sure to read the Notes and FAQ sections below before requesting help in the comments if you encounter any problems with code generation (Especially for Micro QR Codes or backslash characters you may encounter on some codes!).
This page is very popular and because of that, it gets an incredible amount of comment spam. Sometimes legitimate comments can get caught as spam and I can miss them, so if your comment does not appear after some time, you can contact me from the email address on my contact page.
READ THIS FIRST:
I am getting many questions about scanning the codes created on this generator. Most of them are about some problem with the scanner not detecting the content of the code properly. This generator follows established standards strictly and most scanner apps except Qrafter and Qrafter Pro for iOS don’t follow those standards completely. So, if you somehow end up with an unexpected result after scanning a code, it is because that your scanner was developed lousily. If you are on iOS, use Qrafter or Qrafter Pro for guaranteed standards compatibility. For other platforms, please contact the developers of your scanner app to tell them to start following the standards that were established for a reason.
Notes:
You can follow me or Qrafter on Twitter.
QR Code is far more widespread than Data Matrix, Aztec Code or Micro QR Code. Actually Micro QR Code is rarely used and is only given here as a technology preview. If you want to create a campaign for your products using a 2D Code, make sure that you are using QR Codes, not the other types.
Data Matrix and Aztec Code have significantly lower capacity (4096 alphanumeric characters for QR Code, 3067 for Aztec Code and 2335 for Data Matrix), so if you would like to encode a lot of text, select QR Code.
To create the best readable code for long URLs, use one of the URL shortening services so that the resulting code is as small as possible. I personally prefer bit.ly over the others.
Micro QR Code cannot hold more than 35 numeric and 21 uppercase alphanumeric characters, and it can hold even less characters when you use lowercase characters. When encoding a URL into a Micro QR Code, try using all uppercase characters for longer URLs. I don’t know of a scanner that supports Micro QR Code though.
If your input cannot be encoded, the generator will give a warning. In that case, lower the character count in your input and try again.
If your device cannot interpret the encoded 2D Code properly, it probably means your scanner program is written poorly or does not have the capability of decoding that particular code format; or your device does not accept that action, because all codes created by this script and the content within them are compliant to all necessary published standards (vCard standards, URL encoding schemes, NTT DoCoMo standards, etc.).
While we are talking on standards, let me open the topic up a little bit more. Sadly most scanners out there do not follow special character escaping standards. Characters like “:” or “;” are special characters in vCard, meCard or vEvent specifications, and they should be properly escaped for the input to be interpreted correctly. This generator follows these standards correctly, and so a URL field like “http://example.com” becomes “http\://example.com” after escaping. The problem is, some scanners do not know how to handle this escaped character and break altogether. If you encounter such problem, select No for Escape Special Characters in vCard, meCard or vEvent creation. But while you will be able to read those QR Codes in broken scanners, be aware that, your 2D Code will not be standards compliant and you may not be able to add a URL that includes a second colon (for example as a port number separator) or semicolon when you do that. If you are on iPhone or iPad, I strongly suggest that you ditch your broken scanner and download Qrafter or Qrafter Pro. They are fully compliant to said standards. This way, I hope that developers will be forced to create scanners that obey standards that were established for a reason.
Data Matrix, Aztec Code and Micro QR Code do not support characters other than ASCII because of their spec, so if your input has international characters, always use QR Code. Another caveat of Micro QR Code is that, it is not supported by most of the scanner programs out there. As for Kanji and Cyrillic characters, again, only QR Code should support them.
Always use dark colors for foreground color and light colors for background color. If there is not enough contrast between foreground and background colors, your device will most probably fail to decode the code. Another warning: The EPS version I had to use does not support transparency, so you should use another format if you are going to have transparent foreground or background in your codes.
Twitter Profile Image Overlay option overlays your Twitter profile image onto a code that includes your Twitter profile URL. Images created with this option will behave very oddly with vector image formats. You have been warned! ๐
Currently you can do the following actions with 2D codes generated with this form:
- You can browse to a website.
- You can bookmark a website.
- You can make a phone call.
- You can send a short message.
- You can send an e-mail.
- You can create a vCard (v2.1 or v3.0) with coordinates to add a contact to your device.
- You can create a meCard to add a contact to your device.
- You can create a vCalendar event to add to your calendar.
- You can create iTunes app and review URLs for iOS devices.
- You can create
market://
URLs for searching for publishers or packages on Market app for Android. - You can create Foursquare venue URLs.
- You can create special
youtube://
URLs for YouTube app on iOS. - You can fetch and encode the latest tweet of a Twitter user.
- You can overlay a Twitter profile image over the code.
- You can create a mobile URL to tweet on Twitter.
- You can connect to a WIFI network on Android devices.
- You can read plain or free formatted text on your device.
You can change the block size of the generated image to make it bigger or smaller. Also, you can change the margin size of the image to add more quiet zone if your decoder cannot decode it (Especially Data Matrix seems to need bigger margin sizes). Error correction level for QR Code (ignored for other code types) can be set to 4 different values and higher values may cause the image to be decoded slightly slower. The 4 values can be explained like this:
- Low (L): Up to 7% of errors can be corrected.
- Medium-Low (M): Up to 15% of errors can be corrected.
- Medium-High (Q): Up to 25% of errors can be corrected.
- High (H): Up to 30% of errors can be corrected.
You can choose PNG, PDF, SVG or EPS outputs. SVG will output a vector image XML file, and you can edit it in applications like Adobe Illustrator or Inkscape.
Please be aware that while I make checks for illegal characters to protect my server, I do not check your input for a meaningful value.
The image generation is done using third party encoders. I have only written a handy PHP front end that formats your input and passes it to these encoders.
A note about printing from Roy, a fellow user of this generator: When codes are generated, they are created in RGB (my note: yes even if they are black and white, they are in RGB colorspace) and if they are used in printing, they should be converted to grayscale or CMYK so that, when printed, only the black plate is used. This ensures the highest edge resolution, particularly in smaller sizes.
QR Code Scanners:
The best scanner apps for iPhone and iPad are Qrafter and Qrafter Pro. They are available on the App Store. They are designed for both iPhone and iPad and Qrafter is free with advertisements, while Qrafter Pro is paid with no advertisements. They are able to understand all actions on this generator (and more) and are the most advanced scanners for QR Codes on iPhone and iPad.
For Android, the best option seems to be the Barcode Scanner app from ZXing.
For Nokia Maemo/Meego, you can use Mbarcode according to Ryks, another commenter.
For other devices, you may find one, suitable for your device from Kaywa or QuickMark.
QR Code is a registered trademark of DENSO WAVE INCORPORATED in the United States and other countries.
Qrafter is a registered trademark of Kerem Erkan in the United States, European Union and other countries.
FAQ:
Here is an updating list of frequently asked questions.
Q: Can I change the content of a code I created if I find a mistake?
A: The codes generated on this generator are standalone, which means they have no connection to this generator after being generated. This also means they include the content directly inside them, and if the content needs to change, the generated code image will change. Please test your code images with as many devices and scanner apps as possible to avoid any problems after printing the codes.
Q: Why do I get unwanted characters like a backslash (\) or semicolon (;) in the result when I scan a QR Code?
A: You are using a QR Code reader that cannot parse the contents of QR Codes correctly. Many readers are especially weak at parsing vCards. Use a proper app from the QR Code Scanners list on this page.
Q: Do you harvest the information I enter into this form?
A: No, I don’t use the information you enter to this form in any means. After you create your 2D Code, the information is removed from my server.
Q: Can I track the scan information for the 2D Codes I create on this generator?
A: You can’t track the 2D Codes you create on this generator unless you create your own trackable URL (for example a bit.ly URL) and then enter that URL to generate a QR Code for it on this page.
Q: Do the 2D codes that were created on this generator have an expiration date?
A: No, all codes generated on this generator can be used as long as you want.
Q: Can I use the codes I create on this generator commercially? Do I need to pay any fees?
A: You can use the codes created on this generator both commercially and personally. There are no fees to pay. The only favor I ask back is the promotion of Qrafter or Qrafter Pro on your site as your recommended reader app for iOS devices. But it is only a request, you are not obliged to do that. ๐
Q: What is the minimum size for a QR Code so that it can be scanned with all devices?
A: The answer to this question cannot be given with exact proportions. New devices with autofocus cameras can scan very small QR Codes, but old devices that don’t have autofocus cameras will have problems with scanning codes smaller than one or two inches. Also it depends on the size of the information that you put into the QR Code. You need to test your QR Code with many devices, old and new to find the best compromise.
Q: Can I overlay an image on top of the QR Code like the one in “Twitter Profile Image Overlay” action of this generator?
A: Yes you can. Create a QR Code with highest error correction and select a vector output. This way, using your preferred image editor, you can overlay an image that’s up to 30% of the QR Code. Be careful not to overlay the image on top of the 3 alignment squares though.
I love that this is available and not an extortion scam like so many “free trial” QR Code generators. Thank you for the time and energy you have put into this. I hope you know you have helped a lot of people!
Thank you for your kind comments. Much appreciated.
Dear Kerem,
thanks a lot for providing this website and the service of generating QR codes for free.
We have used your services to create a test QR code for a campaign. Unfortunately, this test QR code has now ended up on the print file and redirects to the wrong website. Now the printed material has arrived and there is no way back. Is there any way to change the stored URL?
I’m very sorry to bother you with this. We have already tried other solutions, but so far without success.
Thank you very much in advance for your reply.
Best regards, Florian
Hi Florian, unfortunately the contents of a QR Code cannot be changed after it is created. The only solution would be to redirect the wrong page to the correct page on the webserver.
Hi Kerem,
Thank you for your work!
Does a QR code have valid duration? or It works as long as a website links to the code?
A QR Code is self contained. So it is impossible for it to expire.
Normal QR codes are simple coded texts and therefore they are valid indefinitely. But some webQRcode creators offer to create indirect QR codes which work via a third-party site which redirects to the desired URL but to get paid these QRcode creators limit the number of possible redirections or the validity period of the redirection if you don’t pay. And after this free trial offer, the QRcode is no longer redirected and therefore no longer valid. This is of course a scam, which should be avoided.
You can consult Unitag on this subject: Unitag offers free dynamic QR codes for a trial
Well any service that creates QR codes that contain content which could expire should not be used. Unitag is also in those services in my opinion.
Hi Kerem
Thanks for that excellent QrafterPro! Will there ever be a desktop version for macs that can read from websites (firefox / safari…) or from the clipboard?
Hi, if you have an Apple Silicon device, you can use Qrafter on your device with the iPad version. I am considering a Mac version too.
Hello, I was wondering if I can create a QR code with a pdf? Let me know when you can, thank you.
Hi, to do that youโll need to upload the PDF to a web site and create a QR code for its link. It is impossible to include a PDF directly in a QR code.
Hello Kerem-
Thanks for building this wonderful app. Quick question on the call back logic.
When I use the URL below to create a code, it opens up the Wifi option screen. I am trying to send in a free text value. Is there a way to set the code action in the URL?
qrafter://x-callback-url/create?content=test
Thanks!
VB
Hi, thatโs a bug and it should open the free text screen instead of the wifi screen. Iโll fix it in the next version. Thanks for the heads up!
Just for clarity, after your fix, will I be able to send in a free text param in a request from another app and receive the QR image output in the callback as a base 64 text?
Thanks,
VB
Well, unfortunately no. This only initiates the create screen. I never implemented the return of the image back. Iโll need to think about how to do that. X-callback return is used when you scan a code not create a code.
Thanks for clarifying that! Looking forward to the next update.
Appreciate the great work!
Thanks,
VB
Thank you for the kind words ๐
I think I found this page back when it was brand new, I have QR codes on my business cards from back then that still work to this day.
Thank you so much for maintaining this and keeping it free! It is an invaluable tool, and I recommend it to all of my customers who need QR codes.
Thank you for your kind words. Glad to see that it still proves useful ๐
Hmm… Not sure how a QR code could stop working unless it is handled by a redirect. Anyway, I agree.
Still the best code generator i know โฆ using it since years. Thank You!
Thank you! ๐
I’ve been a user of Qrafter with the Pro Pack since 2011 and the now-defunct vCard Getter. I’ve never had issues except for the early days when I had i-nigma and it would read codes Qrafter couldn’t (stopped using i-nigma before the end of that year). Qrafter works flawlessly for me, a wonderful, solid App! Messing around today, as unfortunately, Apps are starting to not be supported on my iPhone 6, I noticed Qrafter Pro show up on the App Store with a price next to it and Qrafter show as open. If I do invest in a new phone, though highly unlikely at this stage, how will I maintain the Pro version via the Pro Pack or will I need a code to get the official Pro version?
Hi Mark, thank you for using Qrafter. If you get a new phone and download Qrafter again, you can easily restore Pro Pack from the help screen using your Apple ID. You will not need to pay again.
Great! Thanks for letting me know, my mind is at rest now ๐
Hi!
I’ve been using your qrcode generator since… years. ๐
Where is it now? Is it discontinued?
Hi, while updating some elements, it looks like I broke the generator page. Fixed now, thanks for your attention. ๐
* my pharmacy uses Aztec Code
* amazon locker uses Aztec Code
* the trains here use Aztec Code
Please add more controlling options to generate Aztec Code here
Please help update ZXing on android with /better/ recognition of Aztec Code. It’s good but could always be faster or better